Best 32 bit 3d printer board [Detailed Reviews]

Looking for the best 32 bit 3d printer board? Look no more.

Here we understand that choosing a 32 bit 3d printer board may be ambitious.

That’s why we try to help you buy the best product by gathering information, examining, and writing reviews.

Last updated on February 11, 2021 3:12 am

As a result of our precise study, here you will find leading 32 bit 3d printer board.

Our #1 pick is BZ 3D Controller Board MKS SGen L V1.0 32-bit Motherboard Compatible Uart/SPI Open Source Marlin2.0/Smoothieware with MKS TMC2208/2209 Steep Motor Driver for 3D Printer Parts (Board+TMC2209 V2.0). Though, all of the products we reviewed are of solid quality.

Pay attention to the comparison chart we made for you and read below to see what we uncovered when we audited the best 10 32 bit 3d printer board.

Best 32 bit 3d printer board Reviewed

Continue reading to see the detailed reviews.

BIGTREETECH SKR Mini E3 V1.2 Control Board 32 Bit with TMC2209 UART Driver DIY 3D Printer Mainboard for Creality Ender3, Compatible TFT35 E3, TFT35, TFT43, TFT50, TFT70 Display

$39.99  in stock
1 new from $39.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 1) If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems.
  • 2) Display screen: 2.8 inches, 8.9 cm color touch screen and Ender3 LCD12864 printer screen;
  • 3) Compatible with BLTouch, RGB color lights, occlusion detection, stop and other functions.
  • 4) Integrated UART mode of TMC2209 to simplify the debugging of motherboard and driver. The expansion port reserved for the TMC2209 pin is used to facilitate the use of DIAG instead of Endstop.

Creativity 3D Printer Parts 9 Independent Motherboard Controller Drives Marlin 2.0 32-bit ARM Cortex-M4 Series Support TMC2208/TMC2209/TMC2130 Motherboard Supports 6 Extruder (Only Board)

$45.99
$40.62  in stock

1 used from $40.62
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • ★ The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved
  • ★ Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864
  • ★ Support Serial WIFI Online Printing. 9 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI;Support power-off continuous printing, material cut detection, shutdown and other functions;Support for dual Z axis printers
  • ★ Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code
  • ★ Support 9 independent motor drives, 6 extruders, 6 controllable fans, 3 uncontrollable fan sockets

KINGPRINT TMC2208 V3.0-UART with SKR V1.3 32bit Smoothieware Controller Panel Board for 3D Printer Compatible With12864LCD/Support A4988/8825/TMC2208/TMC2100 Drivers

$43.99  in stock
1 new from $43.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch
  • 2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
  • 3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;

BIGTREETECH 3D Printer Part SKR V1.3 32bit Control Board Smoothieboard&Marlin Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers

$26.99  in stock
1 new from $26.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 32bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 Microprocessor , the performance has been greatly improved
  • Reserved extended port SERVOS of PWM signal to support BL Touch
  • Support Resume Printing While Power Off,Filament Break,Detection,Automatic Shutdown After Printing and other functions
  • The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper cap
  • SKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation

BIGTREETECH SKR PRO V1.2 3D Printer Control Board 32-bit CPU Mother Board Support TMC2208 Stepper Motor Driver TFT35 Touch Screen for 3D Printer Part

$50.99  in stock
1 new from $50.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

Part NumberZZB000317

BZ 3D Controller Board MKS SGen L V1.0 32-bit Motherboard Compatible Uart/SPI Open Source Marlin2.0/Smoothieware with MKS TMC2208/2209 Steep Motor Driver for 3D Printer Parts (Board+TMC2209 V2.0)

$50.98  in stock
1 new from $50.98
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • ★Adopt 32-bit Cortex-M3 LPC 1768 chip, 100MHZ frequency, strong computing power, performance greatly improved.In-line and external driver port, more expandable and selective.
  • ★Compatible with multiple drivers and special modes (TMC2208 UART mode, TMC2130 SPI mode, etc.),dedicated port reservation, convenient for wiring settings.Use high-quality PCB, and the corresponding pins of each interface are marked with silk screen for easier identification and modification.Using a dedicated power chip, support 12V-24V current input.
  • ★It is compatible with multiple LCD screens.Compatible with all of MKS TFT touch screens.Support lots of open-source firmwares, including smoothie-ware and Marlin V2.0.Compatible with multiple drivers and special modes (TMC2208 UART mode, TMC2130 SPI mode, etc.)
  • ★TMC2209 have all function of TMC2208,can completely replace tmc2208. At the same time,tmc2209 have better heat dissipation,support bigger current,support sensorless-homing function.
  • ★Continuing the characteristics of the TMC series driver, the mute effect is good, Inside the chip 16, Maximum segmentation: 256 segments .Larger driver current, maximum current is up to 2.5A and stable printing current is up to 1.8A.

BIGTREETECH Direct GTR V1.0 32 Bit CPU Control Board Support 6pcs Stepper Motor Driver for 3D Printer TMC2208 TMC2209 Upgrate from SKR PRO

$64.99  in stock
1 new from $64.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 1)The motherboard uses a 32-bit 168MHz ARM-grade Cortex-M4 series STM32F407IGT6 chip, which greatly improves its performance;
  • 2)Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development, eliminating the worries of being unable to master the core code
  • 3)Marlin 2.0 uses powerful development tools and Visual Studio Code integrated development environment: supports online debugging, which is more helpful for product development and performance optimization, and uses C / C ++ language development;
  • 4)Using pluggable fuses, making the replacement process easier;

Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit for Ender3 V2/Ender 3/Ender 3 Pro/Ender 5/Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

$49.99  in stock
1 new from $49.99
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 【Widely Application】: Creality BL Touch works for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro with 32 bit v 4.2.2/4.2.7 mainboard.(Require 3d printer with 32 bit V4.2.2 or V4.2.7 motherboard )
  • 【Easy Firmware Installation】: Simply download the BLTouch firmware(Note:words "without adapter"firmware) from the Creality Official Website and save the file to your printer’s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
  • 【Easy to Install and Use】3 different mounting brackets allows for installation on several of our printers.
  • 【High-precision】Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
  • 【Genuine High Quality Set】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install.

Creality Ender 3 V2 V4.2.7 Silent Motherboard 32 Bit Mainboard with TMC 2225 Drivers Compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 and Ender 5 Pro 3D Printer

$37.99
$35.99  in stock
2 new from $35.00
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 【Super Quiet】The V4.2.7 mainboard comes with low decibel and silent TMC2225 driver,which makes the sound of the printer running below 50 dB.
  • 【Plug and Play】Marlin 2.0.1 and firmware for Ender-3 V2 comes pre-installed on this board. You just plug in and start printing. With USB port, it can be worked with E/Z/Y/X Axis Motor. It comes with a bootloader pre-installed to for easy firmware updates.
  • 【More safe】 Thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem. Bullet Point
  • 【Easy to Operate】Flashing firmware is not a nightmare anymore. Prepare an SD card less than 8GB, save the firmware in SD card and delete other files, only firmware reserved. Then replug the SD card into the card slot and wait to 10s, when progress bar and interface appear, the firmware has been sucessfully updated. Support BL-Touch auto leveling and filament sensor. Bullet Point
  • 【Compatibility】It can work with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 and Ender 5 Pro 3D Printer. PLEASE NOTE: You need to flash firmwre for your printer if you install this board on those printers. Please contact us for related firmware.

BIGTREETECH Direct SKR V1.3 32-bit Smoothieware Controller Panel for 3D Printer Compatible 12864LCD / Support A4988 / 8825 / TMC2208 / TMC2100 Driver with USB Cable

$25.99  in stock
2 new from $14.97
Free shipping
Buy Now
Amazon.com
as of February 11, 2021 3:12 am

Features

  • 1. The 32-bit frequency and 100MHz ARM-class Cortex-M3 series LPC1768 master chip has greatly improved performance; equipped with highly modular open source firmware Marlin2.0 and Smoothieware, convenient for users DIY and secondary development, using C language development, development It's easy.
  • 2. It uses a dedicated power chip to support 12-24V power input; the same power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem; support touch screen, LCD2004 screen, LCD12864 screen, system Can support and switch between Chinese (Simplified), English and other languages.
  • 3. Use SD card to upgrade firmware, easy to operate; SPI working mode driven by TMC2130 on board and UART working mode driven by TMC2208, eliminating complicated wiring process, just use simple plug-in jumper cap to use; support Power failure, continuous material detection, shutdown, and other functions;
  • 4. High-performance MOSFET tube is used for better heat dissipation; the plug-in fuse is used for easier replacement; the extended port SERVOS for PWM signal is reserved to support BL Touch;
  • 5. Use the power selection design to separate the USB power supply from the switching power supply, effectively avoiding the computer USB port being burnt due to short circuit; the PCB board wiring is rigorous and beautiful, and specializing in heat dissipation optimization; the special function interface uses color conspicuous Pin headers greatly reduce the error rate of wiring.

We hope that we helped you get the perfect 32 bit 3d printer board for you. If we didn’t succeded to help you with choosing the best product for you feel free to reach out to us.